GSI 10530CAL Photo-detector
A hybrid photo-detector consisting of a 1.75mm² silicon PIN photodiode, a trans-impedance amplifier with feedback circuitry, all mounted on a ceramic substrate and housed in a hermetically sealed TO5 lensed glass window can.
- Excellent pulse detection response
- Easy to use
- Low noise
- Analogue Voltage Output
| Typical Characteristics |
| DC Supply voltage |
+4 to +36 Volts |
| Frequency Response |
80KHz |
| Quiescent Current |
4.0 mA |
| Output Current |
Source
1mA
Sink
10 mA |
| Step Response (10% to 90%) |
4.5 microsec (rise & fall) |
| Polar Response |
±10 deg to –3dB |
| Operating Temperature |
-20 to +80 °C |
| Dissipation |
650mW |
| Dark Level Noise |
1 mV RMS |
| Output Offset |
± 8mV max |
| Output Voltage |
50 V/microwatt/sq.mm -1mm-2 |
|
Dimensions & Pin-out
Circuit diagram
 |
