Photo Emitter 10630GAL
A hybrid photo-Emitter consisting of a 1.75mm2 silicon PIN photodiode, a trans-impedance amplifier with feedback circuitry, all mounted on a ceramic substrate and housed in a hermetically sealed TO5 lensed glass window can.
- Excellent pulse detection response
- Easy to use
- Low noise
- Analogue Voltage Output
Typical Characteristics
- DC supply voltage +4 to +18 Volts Peak wavelength 569nm
- Quiescent current 4.0 mA
- Spectral half bandwidth 15nm
- Maximum LED current de-rate data 30 mA continuous
- Output beam angle 8° nom
- Device frequency response 240KHz
- Peak LED current 100mA (10% duty cycle @1kHz)
- LED forward voltage 2.1 V @20mA
- Monitor o/p voltage 1 V @20mA
- Luminous intensity 55 mcd @20mA
- Operating temperature -20 to +80°C
