Photo Emitter 10630KAL
A hybrid photo-Emitter consisting of a 1.75mm2 silicon PIN photodiode, a trans-impedance amplifier with feedback circuitry, all mounted on a ceramic substrate and housed in a hermetically sealed TO5 lensed glass window can.
- Excellent pulse detection response
- Easy to use
- Low noise
- Analogue Voltage Output
Typical Characteristics
- DC supply voltage +4 to +18 Volts Peak wavelength 569nm
- Quiescent current 4.0 mA
- Spectral half bandwidth 50nm
- Maximum LED current de-rate data 30 mA continuous
- Output beam angle 8° nom
- Device frequency response >1MHz
- Peak LED current 100mA (10% duty cycle @1kHz)
- LED forward voltage 1.3 V @20mA
- Monitor o/p voltage 1.1 V @20mA
- Luminous intensity 0.7mW
- Operating temperature -20 to +80°C
